We here at ITW Engineered Polymers North America offer a variety of products for the marine market. Our products are designed to be used for shipbuilding and repair, anti-slip military decking, IMO decking, and D-I-Y repair. Our proven track record of success has made our marine products a staple in the industry.
Adhesives | Repair Products | Industrial Coatings
Proven Products from the organization that developed CHOCKFAST ORANGE® the reliable, poured-in-place, epoxy resin chocking system used to install more than 40,000 main propulsion engines... plus auxiliaries over a 40 year period.
Conveniently pourable, two-component, structural epoxy “chock” that replaces tediously fitted steel shims (or steel chocks) assuring intimate contact with machined or un-machined equipment bedplates. Virtually 100% effective bearing underneath supported equipment.
Modified Polysulfide Glass Reinforced Epoxy Laminate
The Thiokol/Phillyclad 1775/620 TS system is designed to meet the requirement of MIL -STD-2199-A (SH) for use on the US Navy, Coast Guard and Commercial Shafts exposed to sea water. This shaft coating system is comprised of a specially formulated THIOKOL barrier coat and Phillyclad Fiberglass coating. The system consist of Thiokol 5050 Primer, Thiokol 2282 fairing compound, 2 coats of Thiokol 2378+ barrier coat and Phillyclad 1775/620 TS fiberglass resin system. This is a corrosion resistant system is designed for long term protection of water borne shafting and other metal surfaces exposed to severe marine environments.
Tile Adhesive - Adhesive and Grout - QPL - MIL-A-24456. Phillybond TA-30 a two component, high tack strength epoxy for general bonding and structural applications. TA-30 adhesive will support 5 lbs per sq. ft. on overhead or vertical surfaces while curing.
Phillyclad 1775/620TS is an excellent general purpose, nontoxic laminating resin system for FRP application requiring rapid and thorough wet out. Excellent for use as a thin laminate protective coating over steel or wood and fabrication of molded fiberglass structures or components.
MS-440G High Solids Non-Slip Deck Coating
MS-440G is a high solids, two-part, general purpose non-slip deck coating designed to provide maximum wear and impact resistance. Fire retardant in the cured state, MS-440G is resistant to fire and jet blast, most acids, alkalies, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, cellulube and other hydraulic fluids. Because of its tenacious bond, rust will not creep under the coating if fractured.
AST Anti-Slip Coatings were first developed for military use on the decks of America’s aircraft carriers. In what the military terms a “controlled crash,” our coatings are tested and certified to withstand over 15,000 high-impact landings from a 60,000 pound jet fighter, dragging a steel tailhook across the deck at over 170 mph.
In addition to this relentless beating, AST Anti-Slip Coatings were designed to handle some of the most corrosive substances in the world including jet fuel, Skydrol hydraulic fluid, grease, oil and salt spray. If AST Anti-Slip Coatings can stand up to that type of brutal punishment, they can easily handle the heaviest forklift, steel-wheeled, and pedestrian traffic you can imagine.
MIL-PRF-24667C TYPE I, Comp G / IMO
High Solids Non-Slip Deck Coating
MS-440G is a high solid, two-part, general purpose non-skid deck coating designed to provide maximum wear and impact resistance for US Naval vessels.
Fire retardant in the cured state, MS-440G is formulated with epoxy resins to give maximum adhesion to steel, toughness and corrosion resistance. It is resistant to fire and jet blast, most acids, alkali’s, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, cellulube and other hydraulic fluids. Because of its tenacious bond, rust will not creep under the coating if fractured.
MIL-PRF-24667C TYPE V, Comp G Extended Durability
High Solids Non-Slip Deck Coating
MS-5000G is a high solid, heavy duty, non-slip deck coating formulated with special epoxy resins, fillers and aggregates to give maximum performance in terms of wear, impacts, and adhesion on aircraft carrier flight decks and provide non-slip protection for aircraft, rolling equipment and personnel.
Fire retardant in the cured state, MS-5000G is resistant to fire and jet blast, most acids, alkali’s, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, cellulube and other hydraulic fluids.
MIL-PRF-24667C TYPE I/II& III
UV RESISTANT EPOXY-Patent Pending
LOW SOLAR ABSORBING HI-SOLIDS NON-SLIP DECK COATING
MS-660G is an abrasive, heavy duty, non-slip deck coating formulated with special epoxy resins and KevlarR aramid to give maximum adhesion on aircraft carrier flight decks to provide non-slip protection for aircraft, rolling equipment and personnel. The formula is a patent pending special resin system which out performs all other epoxy systems in weatherability. Laboratory QUV testing has shown performance of over 2000 hrs with minimal effect. MS-660G is approved for all aviation decks.
Low V.O.C. Acrylic Epoxy Gloss Coating
MS-200 is a two part Acrylic Epoxy coating formulated to meet the extreme demands placed on coatings in marine and industrial environment . Durable and tough epoxy resins combine with acrylic polymers to make a high performance coating which will hold its color and gloss.
Decorative Color Flake System
Zero V.O.C., Mil-D-24613 Type I Class 2
CF-100 Color Flake is a polymeric deck flooring system consisting of a pigmented epoxy base coat, a colored vinyl flake topping and a clear epoxy sealer.
Fire retardant in the cured state, it is intended for use in light traffic areas on interior metal decks in habitability, sanitary, and other wet spaces.
PolySpec® provides the most comprehensive line of polymeric interior and exterior deck coverings available for ships and offshore drilling platforms. Thesedecorative and functional systems are easy to install and provide longer service life than tile, carpet or vinyl sheet products. They require no waxing or stripping, are fire retardant and offer good wear properties and chemical resistance.
Seamless Epoxy Decorative Chip Floor
PolySpec FLEX IMO is a uniquely formulated decorative polymer deck coverting system that combines aesthetics and fire safety. Throught the use of proprietary technology.
PolySpec FLEX IMO meets IMO/SOLAS requirements for surface flammability, smoke and toxicity. PolySpe® FLEX IMO consists of a two-component, 100% solids epoxy resin base coat, color coat and a clear epoxy receiving and sealing coat. This tough system is finished with a scratch resistant clear polyurethane topcoat.
Deck Top Magnesite Insulation - IMO, U.S. Navy QPL Approved
PolySpec 7K Deck Top Insulation is a trowel-applied magnesium oxychloride cement compound containing ultra-lightweight aggregate particles, with built-in insulation and fire resistance properties.
PolySpec 7K meets the requirements of the United States Coast Guard for an A-60 deck at 1.35” (34 mm) and conforms to parts 1 and 3 of the IMO FTP Code. This product provides an outstanding combination of thermal insulation and fire protection qualities. PolySpec 7K is an excellent underlayment for most finished deck covering systems. Coast Guard Approval Number 164.105/5/0
PolySpec IMO CLAD Epoxy Underlayment is a 100% solids, two component, trowel applied epoxy resin that is mixed with properly graded silica aggregates. It may be used when a deck requires a change in contour or grade, and is specially formulated to provide a sound surface beneath ceramic tile, epoxy terrazzo and other polymeric decking materials.
Marine Tex® epoxy systems repair, bond and fill fiberglass, aluminum, plastics such as PVC, ABS, polyethylene (Starboard® Marine Building Sheet), inflatables, glass, masonry, ceramics, wood, dissimilar materials and more! Dependable high-strength epoxy products, coupled with a knowledgeable technical staff provide the confidence to tackle almost any project.
The Mighty Repair Kit
Marine-Tex is the legendary high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex is manufactured to the highest standards to meet the harsh demands of the marine and industrial environments, and solve many problems for home, auto and hobby applications.
Rapid-Set Marine-Tex is a waterproof epoxy in a convenient 1:1 mix for emergency and permanent repairs. It cures in one hour at 72°F. This 1:1 epoxy paste provides a good bond to fill cracks and voids in fiberglass, steel, aluminum, wood, cast iron and many hard plastics.
Rapid-Set is formulated for quick machinery and mechanical repairs, dockside or at-sea, to get back underway with minimum downtime. It is also used to secure hardware and loose fasteners.
Non-Sagging, Non-Shrinking, Permanently Flexible Epoxy Adhesive
Sandable and paintable, FlexSet resists vibration and bending failures by curing to a tough, flexible consistency that creates an air and watertight seal between mating surfaces.
Bonds to Polyethylene Starboard & Marine Lumber, PVC, Hypalon®, ceramic, rubber, polyurethane, glass, acrylic, steel, fiberglass, polycarbonate, wood, ABS, aluminum, Lexan® and dissimilar materials. Apply above or below the waterline, in wet or dry areas.
Waterproof Epoxy Sealer
Gluvit barrier coat seals and protects hulls and decks. Provides superior protection for fiberglass, wood, aluminum, and steel. Seals leaky seams and rivets in aluminum hulls, and leaks around fiberglass cabins or decks. Hard protective coating flexes with hull movements to bridge and seal hairline cracks.
Gluvit fills minor cracks and pinholes. Its long working time allows penetration into cracks to seal and strengthen. Acts as a barrier coat to minimize water absorption and galvanic corrosion. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding.